AMIKO X-FINDER 3 SOFTWARE NEW UPDATE

AMIKO X-FINDER 3 DIGITAL METER LATEST FIRMWARE

AMIKO X-FINDER 3 Digital satellite finder Firmware Latest Update. Download Amiko company Firmware and Tools. Download Amiko technologies Satellite and Set-top Box Firmware Download. Amiko Webleaflet, User Manual and PC Software. Satellite Receiver New Update and For any Help Contact Us @ Facebook Page or Twitter.

AMIKO X-FINDER 3 SOFTWARE NEW UPDATE

Specification :

Satellite, T2/T Terrestrial and Cable Signal Measurement
Full feature portable set-top box
7” color display
One Conax Embedded card reader
One Common Interface Slot
BNC for analogue camera input
Satellite Blind Scanning support
Spectrum Analyzer
Satellite Dish Angle calculation
Constellation measurement
Dynamic Error Rate Calculation & Display
High Speed USB 2.0 connection
Multimedia playback (MP3, MP4, MKV, AVI, MPG, etc…)
Ethernet Connection
USB WiFi support (Ralink RT5370 chipset)
Full HD (1080p) video output via Digital Video Output
DC 12V output connection
Unicable & DiSEqC 1.0, 1.1, 1.2 & USALS support
Remote Controller included
Car Charger included
Two handles for both left and right handed use
Built-in kickstand
Easy Database Management and Transfer via USB
Easy Software Upgrades through USB & Internet

MORE FEATURES:

Main Processor: 800 MHz based CPU
Flash Memory: 64 Mbits
DDR RAM: 2048 Mbits
Satellite Tuner
Tuner Type: DVB-S / DVB-S2
Input Connector: F-Type connector, female
Frequency Range: 950MHz – 2150MHz
Signal level: -65 to -25dBm
LNB Power & Polarization: Vertical: +13V
Horizontal: +18V
Current: 300mA max
Overload protection
22KHz Tone: 22±1KHz
DiSEqC Control: Amplitude: 0.6±.02V
Version 1.0, 1.1, 1.2, USALS
Demodulation: QPSK, 8PSK
Input Symbol Rate: 2-45Mbps, Convolution Code Rate
FEC: 1/2, 2/3, 3/4, 5/6, 7/8, 1/4, 1/3, 2/5, 3/5, 4/5, 8/9,
9/10


Terrestrial Tuner


Tuner Type: DVB-T / DVB-T2
Input Connector: IEC-Type connector, female
Signal Level: Nordig Compliant, DBOOK Compliant
FEC: DVB-T: Viterbi + Reed Solomon 1/2, 2/3, 3/4, 5/6,
7/8
DVB-T2: LPDC + BCH 1/2, 3/5, 2/3, 3/4, 5/6
Frequency Range: 47-862MHz
Demodulation: QPSK, 16QAM, 64QAM, 256QAM (both rotated
and non-rotated)
Guard Interval: 1/4, 19/256, 1/8, 19/128, 1/16, 1/32, 1/128
FFT Mode: 1k, 2k, 4k, 8k, 16k, 32k normal and extended
Channel Bandwidth: 6 / 7 / 8MHz
Antenna Output Power: 5V 50mA max
Demodulation: COFDM 2K/8K


Cable Tuner


Tuner Type: DVB-C
Input Connector: IEC-Type connector, female
Frequency Range: 47-862MHz
Signal Level: -20dBmV – +20dBmV
Bandwidth: 8MHz
Demodulation: 16QAM, 32QAM, 64QAM, 128QAM, 256QAM
Input Symbol Rate: 1.5 – 7Ms/s
MPEG TS A/V Decoding
Transport Stream: MPEG-2, H.265
Input Rate: Max 120Mbit/s
Aspect Ratio: 4:3, 16:9
Video Decoding: MPEG-2, [email protected], MPEG-4 part10/H.264, H.265
Audio Decoding: MPEG-1 layer I/II, MPEG2 layer II, Dolby Digital,
AAC
Audio Mode: Left, Right, Stereo, Mono
Sampling Rate: 32, 44.1, 48KHz
A/V & Data Input / Output
Video In: BNC type, analogue video input
USB: High Speed USB2.0 connection (Type A)
Digital Video Output
Ethernet: RJ45 10/100M


Power Supply


Input Voltage: AC 100-240V 50/60Hz
Output Voltage: DC 12V 4.5A max
Power Consumption: 48W max
Battery: 7.4V 6.3Ah
2- Battery Charging Time: 3.5 hours
Battery Discharging Time: up to 6-7 hours
Physical Specifications
LCD Display: 7 inch
Size: 275mm x 175mm x 50mm (WxHxD)
Net Weight: <2.0Kg
Operation Temperature: 0 – +45°C
Storage Temperature: -10 – +70°C
Storage Humidity: 5%-95% RH (Non-Condensing)

 

File Name
New! AMIKO X-Finder 3_ V1.0.75 EMU 09092022.rar
New! AMIKO X-Finder 3_ V1.0.75 MCAS 09092022.rar

AMIKO X-FINDER 3 Receiver New Software 09/09/2022

Download AMIKO X-FINDER 3 RECEIVER NEW SOFTWARE

LEAVE A REPLY

Please enter your comment!
Please enter your name here

This site uses Akismet to reduce spam. Learn how your comment data is processed.